EasyPro Eco-Series Filter Pads

Product Description

Economy Fountain Basins are versatile basins and ideal for use with a variety of statuary pieces.

• Clear span grating - no legs for easy pump installation and removal
• Designed for concrete blocks to sit under grating which greatly increases load capacity!
• 100 pound load rating with grating only, 500+ pounds when used with blocks
• 40" and 48" sizes available

FSB18 Optional Fine Screen for FBL40-FBL48 allows use of smaller rocks to cover top of basin.

EasyPro Liquid Barley Straw Extract

• All natural liquid formula - easier to use than pellets or bales
• Keeps water clean and clear
• Works faster than straw and is seeded with bacteria to ensure results

Dosage:

• Two fluid ounces per 1000 gallons of water
• Apply Every 2-3 weeks Spring/Summer

Process Technology is pleased to announce the introduction of our SmartOne® line of PTC (positive temperature coefficient) electric immersion heaters. With this technology, thermal over-temperature protectors are no longer required to ensure safe operation. PTC aquaculture heaters are more dependable with extended service life and will not burn out in air like traditional resistance heaters. Unlike resistance heaters, these heaters continue working in high solids applications.

A PTC heater utilizes solid state ceramic heating elements as its heat source. These devices are “self-regulating” - the maximum temperature is internally limited regardless of the operating conditions. Therefore, these heaters have a built-in safety never seen before in electric immersion heaters. Traditional resistance heaters have the potential for a runaway heat condition if operated out of water, but a PTC heater can self limit its maximum temperature regardless if operated in water, air, or completely surrounded by solids.

If the temperature goes down, so does the resistance (thereby increasing power output). If the heat transfer is impeded, as would happen when i.e. operating in air, the temperature will increase (as will the resistance) resulting in reduced power output. This concept is similar to technologies used in car seat warmers or hair dryers – a unit can only reach a predetermined maximum temperature before it turns itself down.

In the aquaculture industry, a common threat to heater life is buildup in waters with dense solids resulting in overheat conditions. Since these conditions will not cause the SmartOne® to overheat, it will last significantly longer than a traditional heater. The maximum output temperature is below the ignition point of most plastic tanks as well, so overheat damage is prevented if the element is operated in air or becomes covered with buildup. (Please note: periodic cleaning is still recommended since buildup can increase the rate of chemical corrosion of any heater.)

Dependable, safe and long-lasting – State of the Art Smart.

• Single phase only
• 120" (3 m) cord length, longer lengths available
• 14 inch long
• 1/2" wide round legs standard, taller legs available

EasyPro Platinum Max Color Koi & Goldfish Food

• A high quality feed designed to provide a staple diet and enhance the vibrant colors in your fish
• Fortified with spirulina and other marine ingredients to enhance the natural coloration of koi and goldfish
• 5.0 mm (3/16") floating pellet, ideal for larger fish.

EasyPro Max Growth & Color Fish Food

• A high performance diet designed for growing fish
• Fortified with spirulina and other marine ingredients for maximum color
• Does not cloud water
• 3.0 mm (1/8") floating pellet, ideal for young fish

Mesh Media Bags

Holds all types of media including salt, carbon, zeolite, barley pellets, filtration media and more!

• MB21 and MB22 are 1/4" mesh and have drawstring with push button release
• MB18F is 3/16" fine mesh and has drawstring with push button release

EasyPro membrane air diffuser assembly features a hollow base that can be filled with sand or gravel. This eliminates the need for bricks and straps to get the diffuser to sink! Excellent choice for any Koi pond or water garden.

• Molded base allows for strain relief clamp to secure tubing onto base
• Built in check valve prevents backflow of water up air line
• Inlet air fitting (included) accepts 3/8", 1/2" or 5/8" tubing
• Membrane air diffuser assembly features a hollow base that can be filled with sand or gravel
• Eliminates the need for bricks and straps to get the diffuser to sink
• Available in single, dual and Quad head assemblies.

Additional Information:

• 3/4" female threaded outlet is located in the base of each diffuser.
• 3/8" and 1/2" barbed tubing adapter included (other 3/4" MPT nylon barbed sizes available below for different size tubing).
• 10" Air Diffuser