Product Description
Kichler Mini All-Purpose Recessed Light - 3.5 Watts
Landscape lighting versatility and functionality get completely redefined with the Kichler 12V Integrated LED All-Purpose Recessed Light. Use it practically anywhere to create a dynamic lighting effect: embed in concrete to mark a path, install over a patio to deliver ambient light, uplight trees or walls for beauty and safety. The compact size, durable design and generous light output assure you get the most out of every install.
This fully sealed and encapsulated fixture has 100 lumen output with a 2700K CCT. The three field changeable beam optics are included with each fixture: 20-, 40- (factory installed), and 75-degrees allow you to put light where you want it. A removable spring clip and compression sleeve adapt to a wide variety of applications for seamless installation. IP68 rated against dust and water ingression. Additional features include a 6000kV surge protection built-in to guard against power irregularities and a 9-15-volt operating range.
Features & Benefits:
- 3 field changeable beam spread optics offered: 20, 40 and 75° options putting light where you want it
- Integrated, fully sealed and encapsulated fixtures keep all critical components protected against the elements
- 9 to 15-volt operating range to assure consistent light output throughout a run
- Removable spring clip and compression sleeve adapts to a wide variety of applications for seamless installation
- True delivered lumens and beam spreads, unlike LED lamps used within socketed fixtures
Applications Include:
- Up-lighting on buildings or architectural features
- Indicator light on pavers, decks or concrete
- Path lighting on walkways, driveways or patios
- Step lighting on entrance ways
- Down-lighting on pergolas or outdoor structures
Specifications:
Performance:
- Lumen output: 200
- Input voltage: 9-15
- Power (W): @ 15V AC: 3.5 Watts
- Efficacy (lm/W @ AC) 57
- Halogen Comparison: 20 Watts
Fixture:
- Light Source: Integrated LED
- Number of LEDs: 1 High Output Discrete LED
- Color Temperature 2700K
- Color Rendering Index: 80+
- Beam Angles: 20°, 40°, 75°
- Binning: 3 Step
- Fixture can be used: UP or DOWN position
- Drive and Walk Over Rated Yes for Pedestrian Traffic
Input:
- Input Voltage Range: 9-15V AC or DC with no loss in light output
- Input Frequency: 47-63Hz
- Input Current: 1A (100 lm), 2A Max (200 lm) @ 9V AC
- Inrush Current: 3A Max
- Efficiency > 50 lm/W @ 12VAC
- Power Factor > 0.7 @ 15V
Output:
- 16141 200 Lm
Environmental:
- Environmental Protection Rating Wet, IP 68
- Operation Ambient Temperature -25°C - +40°C
- Expected Life Time (L70) 50K Hours
Mechanical & Housing Specification:
- Diameter (top) 2.2"
- Height (fixture) 2"
- Width (body) 1.5"
- Height (body) 1.75"
- Height (top) 0.25"
- Housing Material Stainless Steel
- Housing Color & Surface CBR Brass
- Weight .94 LBS
Fixture:
- Glass Lens: Tempered, shock resistance glass with high tolerance for thermal expansion and stress.
- Body: 304 Stainless Steel body, 304 Stainless Steel or C360 Brass tops, 304 Stainless Steel Retention Clips
- Wire: 18 AWG, SJT-W, 105°C, 300V, 72" useable length
- Optics: Polycarbonate T.I.R. lens provides superior fixture beam angle. 40° installed, 20° and 75° included as accessories.
Included Accessories:
- Includes 20°, 40°, and 75° optics, 2 gel-filled wire nuts, PVC sleeve and spring expandable retention clip.
- Note: 75° Optic is marked with a 60° on the optic, 75° beam spread is delivered from the fixture. Also, includes O-rings for both 1.5" Schedule 40 and 80 PVC
